Publications

Publications by Research Area

Journal and Transactions Publications

  • Raed Hasan, Tugce Kasikci, Joseph F. Wilson and Brad L. Kinsey (2012) “Experimental and Numerical Investigation of Key Assumptions in Analytical Failure Criteria for Sheet Metal Forming”, in preparation for the Journal of Manufacturing Science and Engineering.
  • Reid VanBenthysen and Brad Kinsey (2012) “Effect of Specimen Planar Area on Electromagnetic Flanging”, in preparation for the Journal of Manufacturing Processes.
  • Lijie Wang, Yannis Korkolis, and Brad L. Kinsey (2012) “Investigation of Strain Gradients and Magnitudes during Microbending”, Journal of Manufacturing Science and Engineering, in press.
  • Michael S. Siopis, Brad L. Kinsey, Nithyanand Kota and O. Burak Ozdoganlar (2011) “Effect of Severe Prior Deformation on Electrical-Assisted Compression of Copper Specimens”, Journal of Manufacturing Science and Engineering, Vol. 133, 064502, 1-5.
  • Raed Hasan, Igor Tsukrov, and Brad L. Kinsey (2011) “Effect of Element Type Parameters on Failure Prediction Using a Stress-Based Forming Limit Curve”, Journal of Manufacturing Science and Engineering, Vol. 133, 061002, 1-8.
  • Sunal Parasiz, Brad L. Kinsey, Numpon Mahayatsanun, and Jian Cao (2011) “Effect of Specimen Size and Grain Size on Deformation in Microextrusion”, Journal of Manufacturing Processes, Vol. 13, pp. 153-159.
  • Verena Psyk, Desiree Risch, Brad L. Kinsey, A. Erman Tekkaya, and Matthias Kleiner (2011) “Electromagnetic Forming – A Review”, Journal of Materials Processing Technology, Vol. 211, No. 5, pp. 787-829.
  • Christine M. Dzialo, Michael S. Siopis, Klaus J. Winemann, and Brad L. Kinsey (2010) "Effect of Current Density and Zinc Content during Electrical-Assisted Forming of Copper Alloys", Annals of CIRP, Vol. 59, No. 1, pp. 299-302.
  • Sunal Parasiz, Reid VanBenthysen, and Brad L. Kinsey (2010) "Deformation Size Effects Due to Specimen and Grain Size in Microbending", Journal of Manufacturing Science and Engineering, Vol. 132, No. 01, 1018, pp. 1-8.
  • Michael S. Siopis and Brad L. Kinsey (2010) "Experimental Investigation of Grain and Specimen Size Effects during Electrical-Assisted Forming", Journal of Manufacturing Science and Engineering, Vol. 132, No. 02, 1004, pp. 1-7.
  • Sunal Parasiz and Brad Kinsey (2010) "Prediction of Strain Gradient Hardening during Microextrusion", International Journal of Materials and Manufacturing Processes, Vol. 25, No. 8, pp. 769-776.
  • Joseph F. Wilson, Kyle McLaughlin, and Brad L. Kinsey (2010) "Experimental Methodology to Determine Safe and Defect Regions in Analytical Sheet Metal Forming Failure Criteria", Transactions of the North American Manufacturing Research Institute of SME, Vol. 38, pp. 427-435.
  • Richard M. Onyancha, Matthew J. Derov, and Brad L. Kinsey (2009) "Improvements in Spatial Ability as a Result of Targeted Training and Computer-Aided Design Software Use: Analyses of Object Geometries and Rotation Types", Journal of Engineering Education, Vol. 98, No. 2, pp. 157-167.
  • Matthew J. Derov, Igor Tsukrov, and Brad L. Kinsey (2009) "Analytical Prediction of Shifting Behavior in Strain Based Forming Limit Curves for Sheet Metal Using a Stress Based Failure Criterion", Transactions of the North American Manufacturing Research Institute of SME, Vol. 37, pp. 293-300.
  • Brad L. Kinsey, Erick Towle, Edward J. O'Brien, and Christopher F. Bauer (2008) "Analysis of Self-efficacy and Ability Related to Spatial Tasks and the Effect on Retention for Students in a College of Engineering and Physical Science", International Journal of Engineering Education, Vol. 24, No. 3, pp. 488-494.
  • Brad L. Kinsey, Erick Towle, and Richard M. Onyancha (2008) "Improvement of Spatial Ability Using Innovative Tools: Alternative View Screen and Physical Model Rotator", Engineering Design Graphics Journal, Vol. 72, No. 1, pp. 1-8.
  • Richard M. Onyancha and Brad L. Kinsey (2008) "Experimental Investigation of Microbending Process", Transactions of the North American Manufacturing Research Institute of SME, Vol. 36, pp. 65-71.
  • Brad L. Kinsey (2008) "Size Effects in Microforming", Commercial Micro Manufacturing, Vol. 1, No. 5, pp. 42-45.
  • Sunal Parasiz, Brad Kinsey, Neil Krishnan, Jian Cao and Ming Li (2007) "Investigation of Deformation Size Effects during Microextrusion", Journal of Manufacturing Science and Engineering, Vol. 129, No. 4, pp. 690-697.
  • Brad Kinsey, Matt Bravar, and Neil Krishnan (2007) "Comparison of Analytical Model to Experimental Results and Numerical Simulation for Tailor Welded Blank Forming", Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 211-215.
  • Brad L. Kinsey, Erick Towle, Grace Hwang, Edward J. O'Brien, and Christopher F. Bauer (2007) "Effect of Object and Rotation Type on Self-efficacy and Spatial Ability Test Results", Engineering Design Graphics Journal, Vol. 71, No. 3, pp. 1-8.
  • Richard M. Onyancha, Brad L. Kinsey, Neil Krishnan, and Jian Cao (2007) "Development of an Accurate Process Model for Microscale Forward Extrusion", Transactions of the North American Manufacturing Research Institute of SME, Vol. 35, pp. 121-128.
  • Aaron Sakash, Sumit Moondra and Brad Kinsey (2006) "Effect of Yield Criterion on Numerical Simulation Support for a Stress-based Failure Criterion", Journal of Engineering Materials and Technology, Vol. 128, No. 3, pp. 436-444.
  • Brad Kinsey, Aaron Sakash, and Sumit Moondra (2006) "Robust Prediction of Forming Severity Using a Stress Based Failure Criterion for Sheet Metal", Transactions of the North American Manufacturing Research Institute of SME, Vol. 34, pp. 491-498.
  • Brad Kinsey, Neil Krishnan, and Jian Cao (2004) "A Methodology to Reduce and Quantify Wrinkling in Tailor Welded Blank Forming", International Journal of Materials and Product Technology, Vol. 21, No. '.
  • Sumit Moondra and Brad Kinsey (2004) "Determination of Cruciform Specimen for Stress Based Failure Criterion Evaluation", Transactions of the North American Manufacturing Research Institute of SME, Vol. 32, pp. 247-54.
  • Matt Bravar and Brad Kinsey (2004) "Analytical Determination of Initial Weld Line Position in Tailor Welded Blank Forming", Transactions of the North American Manufacturing Research Institute of SME, Vol. 32, pp. 597-604.
  • Brad Kinsey and Jian Cao (2003) "An Analytical Model for Tailor Welded Blank Forming", Journal Manufacturing Science and Engineering, Vol. 125, No. 2, pp. 344-51.
  • Vikram Viswanathan, Brad Kinsey, and Jian Cao (2003) "Experimental Implementation of Neural Network Springback Control for Sheet Metal Forming", Journal of Engineering Materials and Technology, Vol. 125, No. 2, pp. 141-7.
  • Brad Kinsey, Vikram Viswanathan, and Jian Cao (2001) "Forming of Aluminum Tailor Welded Blanks", Journal of Materials & Manufacturing, Vol. 110, Section 5, pp. 673-9.
  • Brad Kinsey and Jian Cao (2001) "Enhancement of Sheet Metal Formability via Local Adaptive Controllers", Transactions of the North American Manufacturing Research Institute of SME, Vol. XXIX, pp. 81-8.
  • Brad Kinsey, Zhihong Liu, and Jian Cao (2000) "A Novel Forming Technology for Tailor Welded Blanks", Journal of Materials Processing Technology, Vol. 99, pp. 145-53.
  • Jian Cao, Brad Kinsey, and Sara Solla (2000) "Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control", Journal of Engineering Materials and Technology, Vol. 122, No. 1, pp. 113-8.
  • Hong Yao, Brad Kinsey, and Jian Cao (2000) "Rapid Design of Corner Restraining Force in Deep Drawn Rectangular Parts", International Journal of Machine Tools and Manufacture, Vol. 40, No. 1, pp. 113-31.
  • Jian Cao, Brad Kinsey, Hong Yao, Vikram Viswanathan and Nan Song (2000) "Next Generation Stamping Dies - Flexibility and Controllability", Robotics and Computer Integrated Manufacturing, Vol. 17, pp. 49-56.
  • Brad Kinsey, Zhihong Liu, and Jian Cao (1999) "New Apparatus and Method for Forming Tailor Welded Blanks", Journal of Materials & Manufacturing, Vol. 108, Section 5, pp. 653-60.
  • Hong Yao, Brad Kinsey, and Jian Cao (1999) "A Simplified 2D Model for Predicting Corner Failure in a Square Part", Journal of Materials & Manufacturing, Vol. 108, Section 5, pp. 958-66.

Back to top

Publications by Research Area

Microforming

  • Lijie Wang, Yannis Korkolis, and Brad L. Kinsey (2012) “Investigation of Strain Gradients and Magnitudes during Microbending”, Journal of Manufacturing Science and Engineering, in press.
  • Sunal Parasiz, Brad L. Kinsey, Numpon Mahayatsanun, and Jian Cao (2011) “Effect of Specimen Size and Grain Size on Deformation in Microextrusion”, Journal of Manufacturing Processes, Vol. 13, pp. 153-159.
  • Sunal Parasiz, Reid VanBenthysen, and Brad L. Kinsey (2010) "Deformation Size Effects Due to Specimen and Grain Size in Microbending", Journal of Manufacturing Science and Engineering, Vol. 132, No. 01, 1018, pp. 1-8.
  • Sunal Parasiz and Brad Kinsey (2010) "Prediction of Strain Gradient Hardening during Microextrusion", International Journal of Materials and Manufacturing Processes, Vol. 25, No. 8, pp. 769-776.
  • Richard M. Onyancha and Brad L. Kinsey (2008) "Experimental Investigation of Microbending Process", Transactions of the North American Manufacturing Research Institute of SME, Vol. 36, pp. 65-71.
  • Brad L. Kinsey (2008) "Size Effects in Microforming", Commercial Micro Manufacturing, Vol. 1, No. 5, pp. 42-45.
  • Sunal Parasiz, Brad Kinsey, Neil Krishnan, Jian Cao and Ming Li (2007) "Investigation of Deformation Size Effects during Microextrusion", Journal of Manufacturing Science and Engineering, Vol. 129, No. 4, pp. 690-697.
  • Richard M. Onyancha, Brad L. Kinsey, Neil Krishnan, and Jian Cao (2007) "Development of an Accurate Process Model for Microscale Forward Extrusion", Transactions of the North American Manufacturing Research Institute of SME, Vol. 35, pp. 121-128.
  • Sunal Parasiz, Reid VanBenthysen, and Brad L. Kinsey* (2010) "Deformation Size Effects Due to Specimen and Grain Size in Microbending", accepted to the 2010 International Manufacturing Science and Engineering Conference, Erie, PA, Oct. 12-15.
  • Lijie Wang and Brad L. Kinsey* (2010) "Analytical Prediction of Geometrically Necessary Dislocation Density During Plane Strain Microbending", International Conference on Micro Manufacturing (ICOMM), Madison, WI, April 5-8.
  • Reid VanBenthysen* and Brad L. Kinsey (2010) "Microflanging of CuZn30 Specimens Using Electromagnetic Forming", 4th International Conference on High Speed Forming, Columbus, Ohio, March 9-10.
  • Richard M. Onyancha, Brad L. Kinsey*, and Ulf Engel (2009) "Development of a New Analytical Model for Plane Strain Microbending", 2009 4M/ICOMM Conference, Karlsruh, Germany, Sept. 23-25.
  • Reid VanBenthysen*, Jonathan Michaud, Peter DiSalvo, Brad L. Kinsey, Michael Blakely, and Jianhui Shang (2008), "Comparison of Microscale Flanging Using Quasi-Static and Electromagnetic Forming Processes", 2008 International Manufacturing and Science Engineering Conference (MSEC), Evanston, IL, Oct. 8-10.
  • Sunal Parasiz and Brad L. Kinsey* (2008) "Analytical Model to Predict Geometrically Necessary Dislocation Density During Plane Strain Microextrusion", 3rd International Conference on Micro Manufacturing (ICOMM), Pittsburgh, PA, Sept. 9-11.
  • Michael Siopis*, Brad L. Kinsey, Nithyanand Kota, and O. Burak Ozdoganlar (2008) "Development of Microscale Equal Channel Angular Extrusion Process to Produce Ultrafine Grained Samples", 3rd International Conference on Micro Manufacturing (ICOMM), Pittsburgh, PA, Sept. 9-11.
  • Sunal Parasiz*, Brad L. Kinsey, Neil Krishnan, and Jian Cao (2007) "Characterization and Investigation of Deformation During Microextrusion Using X-Ray Texture Analyses", International Manufacturing Science and Engineering Conference (IMECE), Atlanta, GA, Oct. 15-17.
  • Sunal Parasiz*, Brad L. Kinsey, Neil Krishnan, Numpon Mahayotsanun, and Jian Cao (2007) "Effects of Miniaturization on Deformation during Microextrusion", 2nd International Conference on Micro Manufacturing (ICOMM), Clemson, SC, Sept. 10-13.
  • Richard M. Onyancha* and Brad L. Kinsey (2006) "Investigation of Size Effects on Process Models for Plane Strain Microbending", International Manufacturing Science and Engineering Conference, Ypsilanti, Michigan, Oct. 8-11.
  • Richard M. Onyancha* and Brad L. Kinsey (2006) "Size Effects in Micromanufacturing Process Models: Microbending and Microextrusion", International Conference on MicroManufacturing, Urbana-Champaign, Illinois, Sept. 12-15.
  • Neil Krishnan*, Jian Cao, Sunal Parasiz, Brad L. Kinsey, and Ming Li, (2005) "Investigation of Deformation Characteristics of Micropins Fabricated Using Microextrusion", 2005 International Mechanical Engineering Conference and Exposition, MED-81511, Orlando, FL, Nov. 5-9.
  • Robert E. Williams*, Yong Huang, Shreyes Melkote, Brad L. Kinsey, Wei Sun, and Donggang Yao, (2005) "Recent Advances in Micro/Meso-scale Manufacturing Processes", 2005 International Mechanical Engineering Conference and Exposition, MED-79889, Orlando, FL, Nov. 5-9.

Electrical-Assisted Forming

  • Michael S. Siopis, Brad L. Kinsey, Nithyanand Kota and O. Burak Ozdoganlar (2011) “Effect of Severe Prior Deformation on Electrical-Assisted Compression of Copper Specimens”, Journal of Manufacturing Science and Engineering, Vol. 133, 064502, 1-5.
  • Christine M. Dzialo, Michael S. Siopis, Klaus J. Winemann, and Brad L. Kinsey (2010) "Effect of Current Density and Zinc Content during Electrical-Assisted Forming of Copper Alloys", Annals of CIRP, Vol. 59, No. 1, pp. 299-302.
  • Michael S. Siopis and Brad L. Kinsey (2010) "Experimental Investigation of Grain and Specimen Size Effects during Electrical-Assisted Forming", Journal of Manufacturing Science and Engineering, Vol. 132, No. 02, 1004, pp. 1-7.
  • Michael S. Siopis, Brad L. Kinsey*, Nithyanand Kota and O. Burak Ozdoganlar (2010) "Effect of Severe Prior Deformation on Electrical-Assisted Compression of Copper Specimens", accepted to the 2010 International Manufacturing Science and Engineering Conference, Erie, PA, Oct. 12-15.
  • Michael Siopis and Brad L. Kinsey* (2009) "Effects of Miniaturization on Electrical-Assisted Forming Process", 2009 International Manufacturing Science and Engineering Conference, West Lafayette, IN, Oct. 4-7.
  • Michael Siopis and Brad L. Kinsey* (2009) "Effect of Grain Size During Electrical Assisted Microforming", 2009 4M/ICOMM Conference, Karlsruh, Germany, Sept. 23-25.

ElectroMagnetic Forming and Magnetic Pulsed Welding

  • Reid VanBenthysen and Brad Kinsey (2012) “Effect of Specimen Planar Area on Electromagnetic Flanging”, in preparation for the Journal of Manufacturing Processes.
  • Verena Psyk, Desiree Risch, Brad L. Kinsey, A. Erman Tekkaya, and Matthias Kleiner (2011) “Electromagnetic Forming – A Review”, Journal of Materials Processing Technology, Vol. 211, No. 5, pp. 787-829.

Stress based Failure Criterion

  • Raed Hasan, Tugce Kasikci, Joseph F. Wilson and Brad L. Kinsey (2012) “Experimental and Numerical Investigation of Key Assumptions in Analytical Failure Criteria for Sheet Metal Forming”, in preparation for the Journal of Manufacturing Science and Engineering.
  • Raed Hasan, Igor Tsukrov, and Brad L. Kinsey (2011) “Effect of Element Type Parameters on Failure Prediction Using a Stress-Based Forming Limit Curve”, Journal of Manufacturing Science and Engineering, Vol. 133, 061002, 1-8.
  • Joseph F. Wilson, Kyle McLaughlin, and Brad L. Kinsey (2010) "Experimental Methodology to Determine Safe and Defect Regions in Analytical Sheet Metal Forming Failure Criteria", Transactions of the North American Manufacturing Research Institute of SME, Vol. 38, pp. 427-435.
  • Matthew J. Derov, Igor Tsukrov, and Brad L. Kinsey (2009) "Analytical Prediction of Shifting Behavior in Strain Based Forming Limit Curves for Sheet Metal Using a Stress Based Failure Criterion", Transactions of the North American Manufacturing Research Institute of SME, Vol. 37, pp. 293-300.
  • Aaron Sakash, Sumit Moondra and Brad Kinsey (2006) "Effect of Yield Criterion on Numerical Simulation Support for a Stress-based Failure Criterion", Journal of Engineering Materials and Technology, Vol. 128, No. 3, pp. 436-444.
  • Brad Kinsey, Aaron Sakash, and Sumit Moondra (2006) "Robust Prediction of Forming Severity Using a Stress Based Failure Criterion for Sheet Metal", Transactions of the North American Manufacturing Research Institute of SME, Vol. 34, pp. 491-498.
  • Sumit Moondra and Brad Kinsey (2004) "Determination of Cruciform Specimen for Stress Based Failure Criterion Evaluation", Transactions of the North American Manufacturing Research Institute of SME, Vol. 32, pp. 247-54.
  • Kyle McLaughlin, Tugce Kasikci*, Igor Tsukrov, and Brad L. Kinsey (2009) "Investigation of Stress Concentration Factor in Analytical Stress Based Forming Limit Criterion", 2009 International Manufacturing Science and Engineering Conference, West Lafayette, Oct. 4-7.
  • Matthew Derov*, Igor Tsukrov, and Brad L. Kinsey (2008) "The Effect of Model Parameters on a Predicted Stress Based Failure Criterion for Sheet Metal", 2008 International Manufacturing and Science Engineering Conference (MSEC), Evanston, IL, Oct. 8-10.
  • Matthew Derov, Brad L. Kinsey*, Igor Tsukrov, and Kunming Mao (2008) "Analytical Model of a Stress Based Failure Criterion and Prediction of Strain Based Forming Limit Curves Using Numerical Simulations", 2008 Numisheet Conference, Interlaken, Switzerland, Sept. 1-4.
  • Aaron Sakash and Brad L. Kinsey* (2006) "Evaluation of Stress Saturation Effect with a Stress Based Failure Criterion for Sheet Metal Using Numerical Simulations", SAE World Conference and Exposition, Detroit, MI, April 4-7.
  • Sumit Moondra, Aaron Sakash, and Brad L. Kinsey* (2005) "Numerical Simulation Support for a Stress-based Failure Criterion", 2005 International Mechanical Engineering Conference and Exposition, AMD-80317, Orlando, FL, Nov. 5-9.

Improving Spatial Ability

  • Richard M. Onyancha, Matthew J. Derov, and Brad L. Kinsey (2009) "Improvements in Spatial Ability as a Result of Targeted Training and Computer-Aided Design Software Use: Analyses of Object Geometries and Rotation Types", Journal of Engineering Education, Vol. 98, No. 2, pp. 157-167.
  • Brad L. Kinsey, Erick Towle, Edward J. O'Brien, and Christopher F. Bauer (2008) "Analysis of Self-efficacy and Ability Related to Spatial Tasks and the Effect on Retention for Students in a College of Engineering and Physical Science", International Journal of Engineering Education, Vol. 24, No. 3, pp. 488-494.
  • Brad L. Kinsey, Erick Towle, and Richard M. Onyancha (2008) "Improvement of Spatial Ability Using Innovative Tools: Alternative View Screen and Physical Model Rotator", Engineering Design Graphics Journal, Vol. 72, No. 1, pp. 1-8.
  • Brad L. Kinsey, Erick Towle, Grace Hwang, Edward J. O'Brien, and Christopher F. Bauer (2007) "Effect of Object and Rotation Type on Self-efficacy and Spatial Ability Test Results", Engineering Design Graphics Journal, Vol. 71, No. 3, pp. 1-8.
  • Richard M. Onyancha*, Matthew Derov, and Brad L. Kinsey (2008) "The Anatomy of Spatial Ability Improvement Over the Course of a Semester Long Computer Aided Design Course", American Society for Engineering Education Conference, Pittsburgh, PA, June 22-25.
  • Richard M. Onyancha* and Brad L. Kinsey (2007) "The Effect of Engineering Major on Spatial Ability Improvements Over the Course of Undergraduate Studies", Frontiers in Education Conference, Milwaukee, WI, Oct. 10-13.
  • Richard M. Onyancha and Brad L. Kinsey* (2007) "Improvement of Spatial Ability Using Innovative Tools: Alternative View Screen and Physical Model Rotator", American Society for Engineering Education Conference, Honolulu, Hawaii, June 24-27.
  • Brad L. Kinsey*, Erick Towle, Grace Hwang, Edward J. O'Brien, and Christopher F. Bauer (2006) "The Effect of Spatial Ability on the Retention of Students in a College of Engineering and Physical Science", American Society for Engineering Education Conference, Chicago, Illinois, June 19-23.
  • Erick Towle, Jennifer Mann, Edward J. O'Brien, Christopher F. Bauer, Robert Champoux, and Brad L. Kinsey*, (2005) "Assessing the Self Efficacy and Spatial Ability of Engineering Students from Multiple Disciplines", Frontiers in Engineering Education Conference, Oct. 19-22, 2005, Indianapolis, IN.
  • Erick Towle, Jennifer Mann, and Brad L. Kinsey*, (2005) "Work In Progress ' Development of Tools to Improve the Spatial Ability of Engineering Students", Frontiers in Engineering Education Conference, Oct. 19-22, 2005, Indianapolis, IN.
  • Brad Kinsey* (2003) "Design of a CAD Integrated Physical Model Rotator", Proceedings from the 2003 ASEE Annual Conference, Nashville, TN, June.

Tailor Welded Blank Forming

  • Brad Kinsey, Matt Bravar, and Neil Krishnan (2007) "Comparison of Analytical Model to Experimental Results and Numerical Simulation for Tailor Welded Blank Forming", Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 211-215.
  • Brad Kinsey, Neil Krishnan, and Jian Cao (2004) "A Methodology to Reduce and Quantify Wrinkling in Tailor Welded Blank Forming", International Journal of Materials and Product Technology, Vol. 21, No. '.
  • Matt Bravar and Brad Kinsey (2004) "Analytical Determination of Initial Weld Line Position in Tailor Welded Blank Forming", Transactions of the North American Manufacturing Research Institute of SME, Vol. 32, pp. 597-604.
  • Brad Kinsey and Jian Cao (2003) "An Analytical Model for Tailor Welded Blank Forming", Journal Manufacturing Science and Engineering, Vol. 125, No. 2, pp. 344-51.
  • Brad Kinsey, Vikram Viswanathan, and Jian Cao (2001) "Forming of Aluminum Tailor Welded Blanks", Journal of Materials & Manufacturing, Vol. 110, Section 5, pp. 673-9.
  • Brad Kinsey and Jian Cao (2001) "Enhancement of Sheet Metal Formability via Local Adaptive Controllers", Transactions of the North American Manufacturing Research Institute of SME, Vol. XXIX, pp. 81-8.
  • Brad Kinsey, Zhihong Liu, and Jian Cao (2000) "A Novel Forming Technology for Tailor Welded Blanks", Journal of Materials Processing Technology, Vol. 99, pp. 145-53.
  • Brad Kinsey, Zhihong Liu, and Jian Cao (1999) "New Apparatus and Method for Forming Tailor Welded Blanks", Journal of Materials & Manufacturing, Vol. 108, Section 5, pp. 653-60.
  • Brad L. Kinsey*, Matt Bravar, and Neil Krishnan (2004) "Comparison of Analytical Model to Experimental Results and Numerical Simulation for Tailor Welded Blank Forming", Proceedings of the International Mechanical Engineering Conference and Exposition (IMECE), Paper AMD-59322, Anaheim, CA, Nov.
  • Brad Kinsey*, Matt Bravar, and Jian Cao (2003) "Methodology and Model to Determine Key Process Parameters for Tailor Welded Blank Forming", Symposium on Metal Forming: Microscale to Macroscale, Proceedings of the International Mechanical Engineering Conference and Exposition (IMECE), Paper AMD-43610, Washington, D.C., Nov.
  • Brad Kinsey* and Neil Krishnan (2002) "Using FEA Simulations to Determine Advanced Process Parameters for Tailor Welded Blank Forming", A Glimpse into the Future of Sheet Metal Forming, Proceedings of the International Mechanical Engineering Conference and Exposition (IMECE), Paper #34361, New Orleans, Louisiana, Nov.
  • Brad Kinsey* and Jian Cao (2001) "Numerical Simulations and Experimental Implementation of Tailor Welded Blank Forming", Second Global Symposium on Innovations in Materials Processing & Manufacturing: Sheet Materials, 2001 TMS Annual Meeting.
  • Brad Kinsey* and Jian Cao (1999) "An Advanced Manufacturing Process for Tailor Welded Blank Forming", 1999 ASME Congress and Exposition Nashville, TN, Nov. 15-19.
  • Brad Kinsey*, Nan Song, and Jian Cao (1999) "Analysis of Clamping Mechanism for Tailor Welded Blank Forming", 1999 SAE International Body Engineering Conference, SAE Paper No. 1999-01-3192, Detroit, MI, Sept. 28-30.

Nanomolding of Bulk Metallic Glass

  • Catherine Mros*, Kavic Rason, and Brad L. Kinsey (2009) "Nanoforming Model of Bulk Metallic Glass Features", 2009 International Manufacturing Science and Engineering Conference, West Lafayette, IN, Oct. 4-7.
  • Catherine Mros*, Kavic Rason, and Brad L. Kinsey (2008) "Thin Film Superplastic Forming Model for Nanoscale Bulk Metallic Glass Forming", 2008 International Mechanical Engineering Conference and Exposition, Boston, MA, Nov. 1-6.
  • Kavic Rason and Brad L. Kinsey* (2007) "Nanoscale Molding of a Zirconium Based Bulk Metallic Glass", 2007 International Mechanical Engineering Conference and Exposition, Seattle, WA, Nov. 12-15.

Neural Network Control

  • Vikram Viswanathan, Brad Kinsey, and Jian Cao (2003) "Experimental Implementation of Neural Network Springback Control for Sheet Metal Forming", Journal of Engineering Materials and Technology, Vol. 125, No. 2, pp. 141-7.
  • Jian Cao, Brad Kinsey, and Sara Solla (2000) "Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control", Journal of Engineering Materials and Technology, Vol. 122, No. 1, pp. 113-8.

Others

  • Hong Yao, Brad Kinsey, and Jian Cao (2000) "Rapid Design of Corner Restraining Force in Deep Drawn Rectangular Parts", International Journal of Machine Tools and Manufacture, Vol. 40, No. 1, pp. 113-31.
  • Jian Cao, Brad Kinsey, Hong Yao, Vikram Viswanathan and Nan Song (2000) "Next Generation Stamping Dies - Flexibility and Controllability", Robotics and Computer Integrated Manufacturing, Vol. 17, pp. 49-56.
  • Hong Yao, Brad Kinsey, and Jian Cao (1999) "A Simplified 2D Model for Predicting Corner Failure in a Square Part", Journal of Materials & Manufacturing, Vol. 108, Section 5, pp. 958-66.
  • Kathleen Issen*, Brad Kinsey, L. Catherine Brinson, and Linda Broadbelt (2001) "Preparing Future Engineering Faculty: A Professional Development Series", 2001 ASEE Annual Conference and Exposition.
  • Brad Kinsey* and Jian Cao (1997) "An Experimental Study to Determine the Feasibility of Implementing Process Control to Reduce Part Variation in a Stamping Plant", Sheet Metal Stamping: Developments in Sheet Metal Stamping, SP-1221, SAE Paper 970713, pp. 107-12.

updated: 7/2012

Back to top