UNH Planning, Design and Construction Guidelines
Table of Contents
Title |
Modified Date |
||
| Introduction | 6/7/2010 |
||
| CHAPTER 1 – GENERAL PRINCIPLES | 6/7/2010 |
||
| A. Overview | |||
| B. Sustainability – LEED Equivalency | |||
| C. Campus Buildings – Campus Master Plan | |||
| D. Campus Grounds – Landscape Master Plan | |||
| E. Campus Circulation – Accessibility and Mobility | |||
| F. Campus Energy and Utilities – Utility Master Plan | |||
| CHAPTER 2 - PROJECT PROCESS | 6/7/2010 |
||
| A. Project Permitting | |||
| B. Design Intent | |||
| C. Design Development | |||
| D. Documenting Construction and Project Closeout | |||
| CHAPTER 3 - UNIVERSITY PLANNING STANDARDS | 6/7/2010 |
||
| A. LEED Equivalency - Under Development | |||
| B. Site Design | |||
| C. Campus Transportation, Mobility and Safety | |||
| D. Space Planning Standards | |||
| E. Accessibility Standards above ADA and Building Codes -Under Development | |||
| CHAPTER 4 - SUPPLEMENTAL PROJECT REQUIREMENTS -Under Development | |||
| CHAPTER 5 - TECHNICAL CONSTRUCTION & RENOVATION STANDARDS | 3/21/2011 |
||
| Division 1 – General Requirements | 6/7/2010 |
||
| Division 2 – Site Construction | 6/7/2010 |
||
| Division 3 – Concrete | 6/7/2010 |
||
| Division 4 – Masonry | 6/7/2010 |
||
| Division 5 – Metals | 6/7/2010 |
||
| Division 6 – Wood and Plastics | 6/7/2010 |
||
| Division 7 – Thermal and Moisture Protection | 11/5/2010 |
||
| Division 8 – Doors and Windows | 6/7/2010 |
||
| Division 9 – Finishes | 6/7/2010 |
||
| Division 10 – Specialties | 6/7/2010 |
||
| Division 11 – Equipment | 6/7/2010 |
||
| Division 12 – Furnishings | 6/7/2010 |
||
| Division 14 – Conveying Systems | 6/7/2010 |
||
| Division 15 – Mechanical | 6/7/2010 |
||
| Division 16 – Electrical | 3/21/2011 |
||
| Division 17 - Controls | 6/7/2010 |
||